Author Archive for Rocky Mountain Gunsmith

Zoom

$24.93 (Excl. Tax)

Weight: .04lb

Categories Boresighter , Sights , Tools , Field Sport, Inc.

Keywords

Boresight , Laser , Cartridge , Remington , .222

Product Description

Brass Cased Laser Boresighter
.222 Remington Chambered
Red Laser
Uses LR41 Batteries

Overview
Brass cased red laser boresighter is used to get you on paper when sighting in your optics, without spending too much ammo trying to figure out where your scope is hitting. It is recommended to boresight at 25 yards to get you on paper, then fine tune it and make adjustments to get you on point with your optics.

Warranty
All FSI accessories carry a 100% satisfaction guarantee against manufacturer's defects in original materials and workmanship. If your FSI accessory shows evidence of such defects, FSI will fix, repair, or replace your accessory at the most cost effective manner possible. FSI does not warranty products or damage caused to our products as a result from improper installation or incorrect installation of other manufacturers' products. Be sure to keep your sales ticket or receipt as proof of purchase date when making a claim.

Products

6 Position Extention Buffer Tube, Mil-Spec

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$21.61 (Excl. Tax)

Weight: .33lb

Categories AR10 Accessories , Buttstocks , Field Sport, Inc. , Buffer Parts

Keywords

Mil-Spec. , Buffer Tube

Product Description

Precise CNC Machining
Tight Tolerance Control With Zero Gap Fitment With Butt Stock And Receiver
T6 6061 Aircraft Aluminum Construction
Matte Black Anodizing with Type III Anodizing
Mil Spec Size Buffer Tube

Overview

AL-1055M guarantees precise fitment with your mil-spec butt stock. All aluminum T6 aircraft 6061 construction with level III hard anodized finish. Allows for installation of a butt stock assembly and threads onto the rear of your AR lower receiver.

Warranty

All FSI accessories carry a 100% satisfaction guarantee against manufacturer's defects in original materials and workmanship. If your FSI accessory shows evidence of such defects, FSI will fix, repair, or replace your accessory at the most cost effective manner possible. FSI does not warranty products or damage caused to our products as a result from improper installation or incorrect installation of other manufacturers' products. Be sure to keep your sales ticket or receipt as proof of purchase date when making a claim.

Products

CAR 4oz Buffer

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$18.28 (Excl. Tax)

Weight: .32lb

Categories Field Sport, Inc. , Buffer Parts

Keywords

Buffer. , 4oz

Product Description

AR Carbine Buffer
Length: 82.55mm
Weight: 4.97oz, close to 5oz, Tungsten filled buffer.
Precise Machined Aluminum
Polyurethane Bumper

Overview

Machined aluminum recoil buffer in 4.9oz sports a mil-spec polyurethane bumper, durable hard-anodized finish, and is filled with low-density tungsten powder that eliminates the noise and shock. This aids in smoother cycling and helps minimize bolt bounce.

Warranty

Products

Super 3 Gun (S3G) Trigger

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$237.50 (Excl. Tax)

Weight: .17lb

Categories Triggers , Geissele Automatics , Small Parts , AR10 Accessories , AR15 Accessories

Keywords

Trigger , S3G , 3 Gun , Super

Description:

Type:	Single Stage
1st Stage Weight:	4.0lbs
2nd Stage Weight:	N/A.
Total Pull Weight:	4.0lbs. (3.25lbs. or 4.0lbs depending on spring)
Adjustable:	No
Recommended Use:	3 Gun
Pin Size:	Mil-Spec

All weights are approximates.

The Geissele Super 3 Gun (S3G) trigger is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community.

Products

FAB Defense Vertical Foregrip w/ Incorporated Bi-pod – Quick Release

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$142.83 (Excl. Tax)

Weight: 1lb

Color Options ^* Color Options

Categories Grips , FAB Defense , Bipods , Tactical Flashlight , AK Accessories , AR10 Accessories , AR15 Accessories

Keywords

release , quick , bi-pod , incorporated , foregrip , vertical

The only fully functional bipod designed for precision shooting built into a vertical foregrip.

Quick release.

Built for designated marksmen and those operating in urban settings who need to transition from close fighting to precision shooting.

An ergonomic foregrip based on our popular TAL-4 grip.

A touch of a button transforms the grip into a sturdy bipod.

Legs are independently adjustable for height.

Bipod allows slight pivot to adjust cant.

Wide stance offers stability lacking in other grip bipod designs.

Dual pressure switch cavities.

Mounts with captive quick-release wingnuts.

Aviation-grade Aluminum, steel, and MIL-SPEC reinforced polymer composite.

Weight        11.8 oz.   (335 gr)
Width          1.97"       (50 mm)
Height         6.18"       (157 mm)
Length        2.76"        (70 mm)
Width    (open/deployed)         7.9"       (200 mm)
Height (open/deployed)          8.6"       (218 mm)

Manufacturer: FAB Defense

Vertical Foregrip w/ Incorperated Bi-pod

$131.14

How many ?
Vertical Foregrip w/ Incorporated Bi-pod & Incorporated Flashlight

$227.14

How many ?
Vertical Foregrip w/ Incorperated Bi-pod & 1" Flashlight Adapter

$155.99

How many ?

Products

AR .308 Gas Block, .936, Regular Profile, Slant, Top, Bottom Picatinny Rail

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$33.25 (Excl. Tax)

Weight: .18lb

Category Gas Blocks

Keywords

Picatinny Rail. , Bottom , Top , Slant , Regular Profile , .936 , Gas Block , .308

Product Description

T6 6061 Aircraft Aluminum Body
Bead Blast Hard Anodized Finish
Solid Machined Construction
Black Oxide Finish
Precise Machining
Milspec 1913 Picatinny Rails Top And Bottom
Short Profile Gas Block for .936 Barrel In 308
45 Degree Slant On Top Of Gas Block

Overview

Black oxide finish, solid precision machined construction. The AR 308 Regular Profile Gas Block for barrels .936 has milspec picatinny rails on top and bottom allowing you to mount accessories such as a front sight or a laser underneath. It sits flush on your quadrail without any gaps. No modification to your barrel is required. The top front slants down 45 degrees for a sleek finish.

Warranty

Products

M4 /AR15 SurvivalButtstock w/Built-in Magazine Carrier and free Polymer 10rd Mag

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$116.28 (Excl. Tax)

Weight: 1lb

Color Options ^* Color Options

Categories Buttstocks , FAB Defense , AK Accessories , AR10 Accessories

Keywords

mag , 10rd , polymer , magazine , buttstock , survival , AR15 , M4

Whether it’s your accuracy or numerous target engagements - you can depend on your last ten chances with our Survival Buttstock w/Built-in 10 round Mag Carrier.

The GL-MAG incorporates an inconspicuous/sleek M4 Magazine Carrier.

• Sleek Design with no Protruding Parts

• No More Awkward Magazine Pouch Dangling From Your Buttstock, Will Not Get Caught on Gear or Webbing

• Keeps all of the Characteristics of our M4 Buttstock, while incorporating a State of the Art Magazine Carrier

• Holds all Standard Sized M4 Magazines

• Positioned Close by for Convenient Mag Change, Providing you with that Tactical Edge You Need

• Unique Inversed Positioning Lever Incorporates a Quick Release Button Allowing Swift Clip Release

•Does Not Interfere or Change Buttstock to Shoulder Positioning

• Ambidextrous Integrated Attachment Points for standard QD Quick Detach Sling Swivels

• Fits Perfectly on Both Mil-Spec and Aftermarket Commercial Tubes

• Made from Mil-Spec Reinforced Polymer Composite

Weight          12.5 ounces (354 gr) (with Magazine)
Width           1.69" (43 mm)
Height          5.1" (130 mm)
Length          7.1" (180 mm)

Manufacturer: FAB Defense

Products

Shark AK47 Muzzle Brake/Pressure Compensator 14-1 LH

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$33.25 (Excl. Tax)

Weight: .24lb

Categories AK Accessories , Muzzle Devices , Field Sport, Inc.

Keywords

LH , compensator , pressure , brake , muzzle , AK47 , AK , shark

Product Description

CNC Machined High Quality Steel
Heat Treated
AK or Variant Shark Muzzle Brake
Side Ported And Ported On Top
Solid Machined Construction
Mil Spec Maganese Phosphate
Reduced Back Pressure
14-1 LH TPI

Overview

MIL SPEC Maganese Phosphate Finish, solid precision machined construction. The AK muzzle brake will reduce recoil & climb which will improve shooting and control. The AK Shark muzzle brake redirects propellant gasses and reduces recoil and flash dramatically. Wraps around your threaded barrel and threads on 14-1 LH (Left Hand) thread pitch.

Warranty

Ergonomic Pistol Grip for AK47

$31.39

How many ?

Products

AR .223 Micro Gas Block, .750, Aluminum

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$24.93 (Excl. Tax)

Weight: .09lb

Categories Gas Blocks , Field Sport, Inc.

Keywords

Aluminum. , .750 , Gas Block , Micro , .223

Product Description

Industrial Grade Aluminum Construction
Solid Machined Construction
Type 3 Hard Coat Anodizing
Precise Machining
Micro Gas Block for .750 Barrel In .223

Overview
Hard coat type 3 mil-spec anodized finish, solid precision machined construction. The AR 223 Micro Gas Block for barrels .750 is used when installing a rifle length quadrail to allow the quadrail to slide through the barrel. The gas tube mounts to the micro gas block just like it would to your regular A2 post gas block, but it is sleek and small to allow a longer rail to be placed.

Products

AR .223 Gas Block, .750, Short Profile, Slant, Top, Bottom Picatinny Rail

by Rocky Mountain Gunsmith • August 11, 2015

Zoom

$29.92 (Excl. Tax)

Weight: .18lb

Categories Gas Blocks , Field Sport, Inc.

Keywords

Picatinny Rail. , Bottom , Top , Slant , Short Profile , .750 , Gas Block , .223

Product Description

T6 6061 Aircraft Aluminum Body
Bead Blast Hard Anodized Finish
Solid Machined Construction
Black Oxide Finish
Precise Machining
Milspec 1913 Picatinny Rails Top And Bottom
Short Profile Gas Block for .750 Barrel In .223

Overview

Black oxide finish, solid precision machined construction. The AR 223 Short Profile Gas Block for barrels .750 has mil-spec picatinny rails on top and bottom allowing you to mount accessories such as a front sight or a laser underneath. It sits flush on your quadrail without any gaps. No modification to your barrel is required.

Warranty

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home1/rmgunsmi/public_html/wp/wp-includes/formatting.php on line 3712

Page 2 of 22

« 1 2 3 4 … 22 »

Related Products

Related Products